Modular Battery Power System For Medical Use

Portable Medical Battery Power System

  •  
  • SKU    772573
  • Name: Modular Battery Power System

The Anton Bauer Elora modular battery power system is a lightweight, high-capacity Lithium-Ion battery that delivers long, reliable run-times. The simple, stylish and ergonomic design makes it easy for caregivers to install and remove the battery using a one-handed operation.

Fast charge times (approximately 4 hours) when used with the Elora Charger and a quick and easy user-friendly battery system designed to meet the most critical standards! This item is designed for medical use.

Accessories

Modular Battery Power Management System For Medical Equipment

  • 240Wh Lithium-Ion battery
  • Size: 7.85 x 3.24 x 4.79 in. (19.93 x 8.22 x 12.16 cm)
  • Weight: 4 lbs. (1.8 kg)
  • Run-time: 6-8 hours (approximately) Average run-time based on 30-40 watt draw
  • Maximum Discharge Rate: 10A
  • Capacity: Nominal minimum 16.2 Ah, Nominal Typical 17.1 Ah
  • Electrically Safe: Advanced protection circuitry, IEC 62133, EN 62133:2003, UL 2054, CAN/CSA-C22.2No. 60950-1-07, UL 60950-1 and DOT 38.3
PDF Drawing
PDF configurator Drawing
Manual Instruction

Elora Battery

This lightweight, high-capacity Lithium-Ion battery delivers long, reliable run-times. The simple, stylish and ergonomic design makes it easy for caregivers to install and remove the battery using one- handed operation. Fast charge times (approximately 4 hours) when used with our Elora Charger. A quick and easy user-friendly battery system designed and tested for real-world use!

 

  • 240Wh Lithium-Ion battery
  • Size: 7.85 x 3.24 x 4.79 in. (19.93 x 8.22 x 12.16 cm)
  • Weight: 4 lbs. (1.8 kg)
  • Run-time: 6-8 hours (approximately) Average run-time based on 30-40 watt draw
  • Maximum Discharge Rate: 10A
  • Capacity: Nominal minimum 16.2 Ah, Nominal Typical 17.1 Ah
  • Electrically Safe: Advanced protection circuitry, IEC 62133, EN 62133:2003, UL 2054, CAN/CSA-C22.2No. 60950-1-07, UL 60950-1 and DOT 38.3

 

Elora Battery Charger

The most advanced system of its kind, the Elora Battery Interface can easily integrate with nearly every mobile workstation, patient monitoring system or mobile medical device that requires power. The scalable, small form factor battery interface is designed for easy battery installation and removal, as well as a secure battery fit.

Using “Bridge Power”, the Elora Battery Interface contains an internal battery to provide enough backup power to swap out a depleted Elora Series battery for a fully charged one. The Elora Battery Interface allows any healthcare facility to standardize on a single power system eliminating battery related problems across multiple device platforms

  • Size: 11.06 x 7.28 x 3.74 in. (28.09 x 18.49 x 9.49 cm)
  • Weight: 4.25lbs (1.9 kg)
  • Output Power Voltage: 120 VAC
  • Multi-Position Mounting Plate: Installs on many common mobile workstation or patient monitoring devices
  • Built-in AC inverter to allow compatibility with 3-prong plugs
  • Internal battery to maintain continuous power during battery swaps
  • Optional power supply allows the interface to be plugged-in to charge

 

Elora Battery Charging Cabinet

The Elora Battery Charging Cabinet sets a new standard in medical pbattery systems. With three (3) charge positions employing “smart” ptechnology, the user has access to fully charged batteries within 4 hours. When the user is prepared to remove a battery from the used next. This feature ensures that all batteries throughout the fleet are used equally to ensure maximum battery life.

Anton/Bauer understands that infection control is a top priority for hospitals and other healthcare facilities. With this in mind, we’ve utilized the latest UV LED technology to aid in the disinfection of the battery surfaces during its charge cycle.

Anton/Bauer’s award-winning technology employs charge protocols designed to deliver the right charge routine for each battery under the prevailing conditions. These protocols ensure each battery charges quickly and as safely as possible.

  • Size: 31.04 x 11.09 x 5.55 inches (78.84 x 28.16 x 14.12 cm)
  • Weight: 30.05 lbs. (13.6 kg)
  • Charge-time: 4 Hours or less (approximate)
  • Wide range mains input compatibility (100-240 VAC 50-60Hz) automatically adapts to any mains source worldwide
  • Modular On-wall or In-wall Mounting: Designed to meet ADA corridor standards (flush mount options) or NFPA 101 Life Safety Code Standards (wall mounted option)
  • 3 charge positions
  • UV LED technology to aid in infection control
  • “Smart Indicator” illuminates a green LED to indicate
  • which battery is ready for use
  • Single power cable